About
Bridging simulation fidelity and materials physics.
CFD engineer turned materials scientist. Currently at TUM, open to full-time and Hiwi/working-student roles in Munich.
Simulation engineer with four years of industrial R&D experience in rotating turbomachinery, internal cooling flows, and reacting-flow systems. At Honeywell I learned to identify the governing physics and balance performance, manufacturability, and cost — but also hit a limit: fluid simulations tell only half the story. A sound design needs equal understanding of how the material responds.
I'm completing an M.Sc. in Materials Science & Engineering at TUM to close that gap and build coupled models whose predictions hold up against measured data. My thesis maps the hydrodynamic performance of hydrofoil-shaped kites for tidal energy with CFD. Lab work at TUM added the experimental side: Gleeble thermal cycling of weld heat-affected zones, hot-wire anemometry, and thin-film deposition for solid-state electrolytes.
Currently exploring
Full-time roles in CFD automation, multiphysics simulation, or materials modelling · Hiwi/working-student positions in Munich · Particularly interested in roles that bridge simulation and experiment, or that need someone who can build tooling around existing solvers
Outside of engineering I'm learning German (A1.2 certified, A2 in progress), and spending weekends in the Alps whenever the weather cooperates.
Trajectory
-
2023 – presentM.Sc. Materials Science & EngineeringTechnische Universität München (TUM) · GPA: 2.4 (German scale)
Focus area: materials in engineering applications. Thesis (due November 2026): CFD-based performance mapping of a hydrofoil kite assembly for tidal energy. Selected modules: Thermomechanical Material Behaviour in AM and Welding, Experimental Fluid Mechanics, Energy Materials, Applied CFD, Design of Wind Farms.
-
Oct 2024 – Jan 2025Research Intern — Solid-State ElectrolytesTUM, Chair of Solid State Electrolyte Chemistry (Prof. Rupp)
Optimised GDC thin-film deposition by spray pyrolysis; characterised interfaces by SEM with quantitative image analysis; identified 10 mol% Gd composition for dense, crack-free films. Supervised by Dr Ya-Ru Wang.
-
2019 – 2023Mechanical Design Engineer → Senior Mechanical Design EngineerHoneywell Technology Solutions Ltd, Bengaluru · Gas-turbine aerospace programmes
Led CFD-driven aerodynamic development for gas-turbine components. CHT cooling-passage analyses, transient FOD studies, structural stress analysis, and Python/VBA automation pipelines. Sole owner of blade-root stress analysis. Delivered $33K annual savings, 26% cycle time reduction. Promoted from Engineer to Senior Engineer.
-
Jan – Jun 2019Mechanical Design InternHoneywell, Bengaluru
Executed B.Tech thesis on site in ANSYS Fluent — evaluated shrouded, squealer, winglet and labyrinth tip geometries for leakage loss and stage efficiency in high-speed rotating flow. Supported CFD and thermal simulation setup for rotating machinery: geometry modification, mesh generation, boundary-condition implementation, and automated extraction of comparative performance data. Converted to full-time engineer on internship performance.
-
May – Jun 2018Project TraineeBhabha Atomic Research Centre (BARC), Mumbai
Designed and optimised a shell-and-tube heat exchanger covering tube geometry, fluid routing and connection interfaces, modelling flow behaviour and pressure distribution in ANSYS Fluent. A parametric thermal-fluid study across geometric variants raised heat-transfer efficiency by ~22%; documented the resulting design changes and performance gains for engineering handover to the thermal-hydraulics group.
-
2015 – 2019B.Tech, Mechanical EngineeringVellore Institute of Technology (VIT) · CGPA 9.16 / 10
Strong fundamentals in thermodynamics, fluid mechanics, and mechanical design. Bachelor's thesis executed on site at Honeywell, evaluating shrouded, squealer, winglet and labyrinth tip geometries for turbine efficiency improvement.